不同类型的高位虾池排污对秋茄幼苗生长的影响     

田园  陈光程  唐飞龙  郑春芳  叶勇 《海洋学报(英文版)》2018,37(6):112-120

中国多数红树林陆地边缘存在着大量的养虾池塘。这些养虾池塘可通过：（1）换塘外排废水，（2）清塘直排污泥影响周围的红树林。本研究共包含两个实验，来探讨这两种类型的排污对秋茄幼苗生长的影响。实验一模拟虾池常规换塘情况，研究换塘废水对秋茄幼苗生长的影响。实验二设置四种虾池清塘污泥沉积厚度（0 cm，2 cm，4 cm，8 cm），研究虾池清塘污泥的累积效应对秋茄幼苗生长的影响。结果如下：在5，15和25三种盐度下，虾池换塘废水未对秋茄生长指标造成显著影响；而清塘污泥对秋茄生长的影响与其沉积厚度有关，大多数生长参数在污泥沉积厚度为4 cm时呈现最大值。秋茄幼苗在适量的沉积厚度下加速了生长，且本实验秋茄幼苗对虾池清塘污泥的耐受性为沉积厚度8 cm。  相似文献   

A land-use mix allocation model considering adjacency,intensity, and proximity     

Sunyong Eom  Tsutomu Suzuki  Myeong-Hun Lee 《International journal of geographical information science》2020,34(5):899-923

ABSTRACT

Land-Use Mix (LUM) refers to the strategy of integrating complementary functions within a building or area. While LUM has become a dominant approach in urban planning, its actual benefits and vision for spatial planning remain unclear. To clarify this issue, this study discerns the spatial features of land-use patterns depending on the compatibilities among land-use categories. Accordingly, this study introduces three LUM measures – adjacency, intensity, and proximity – to identify differences in the spatial distribution of land-use categories. Based on these measures, a land-use allocation model is developed to specify spatial patterns satisfying the given compatibilities. This model is tested by applying the concept of the neighborhood unit on a case study of normative land-use patterns subject to specified compatibilities. The results describe spatial features of four compatibility sets, including a set exhibiting a compatibility conflict between the same land-use pair and LUM measures when, for example, a given land-use pair is compatible in terms of intensity but incompatible in terms of proximity. Understanding the spatial features of a normative land-use pattern that satisfies various possible compatibilities will facilitate the incorporation of the LUM approach into local planning guidance and zoning ordinances.  相似文献   

Optimal Filtering Algorithm for Stochastic 2-D FMM Ⅱ with Multiplicative Noise     

CHUDongsheng LIANGMeng SHIXin ZHANGLing 《中国海洋大学学报(英文版)》2004,3(1):106-110

1　Introduction　Inrecentyearstherehasbeengrowingresearchin terestinthetwo dimensional (2 D )systemtheory .The 2 Dsystemsmayfindapplicationsinareassuchasmarineseismicdataprocessingandimageprocessing .Althoughmoreandmorevaluableresultshavebeengained ,mos…  相似文献   

板翅式换热器综合性能优化的设计方法     

高俊忠  陈维汉 《广东海洋大学学报》2003,23(6):45-49

应用给定换热器结构材料而使换热量最大的两侧换热表面的最佳匹配准则和使可用能损失率最小的最佳运行参数准则。利用两个准则间的关系 ,采用迭代的方式完成换热器的优化设计 ,使换热器的设计达到材料省、换热效果好及运行费用低的目的 ,且能在设计阶段实现。  相似文献   

SAMPLING REMOTELY SENSED IMAGERY FOR STORAGE,RETRIEVAL, AND RECONSTRUCTION*     

P. M. Atkinson  P. J. Curran  R. Webster 《The Professional geographer》1990,42(3):345-353

A major difficulty in remote sensing is handling the many data from sensors aboard aircraft and satellites. In this paper we identify an optimal procedure for sampling remotely sensed data before their storage or on their retrieval. The procedure depends on spatial correlation in the scene and uses kriging to estimate values that have been lost. An example in which data from an airborne multispectral scanner could be diminished to only about one tenth without serious loss of precision illustrates the method.  相似文献   

Optimal Compensation and Implementation for Adaptive Optics Systems     

Douglas P. Looze  Markus Kasper  Stefan Hippler  Orhan Beker  Robert Weiss 《Experimental Astronomy》2003,15(2):67-88

This paper develops a compensation algorithm based on Linear–Quadratic–Gaussian (LQG) control system design whose parameters are determined (in part) by a model of the atmosphere. The model for the atmosphere is based on the open-loop statistics of the atmosphere as observed by the wavefront sensor, and is identified from these using an auto-regressive, moving average (ARMA) model. The (LQG) control design is compared with an existing compensation algorithm for a simulation developed at ESO that represents the operation of MACAO adaptive optics system on the 8.2 m telescopes at Paranal, Chile. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Long-Term Effect of TMD on Vibration Control of An MDOF Offshore Fixed Platform     

SHI  Xiang 《中国海洋工程》2003,17(4):481-494

A three-dimensional fixed offshore platform in deep water modeled by the finite element method is studied in this paper. Analysis of the dynamic response of the MDOF structure is realized taking the non-linearity of the wave drag force and the wave-structure interaction into account. The structural response statistics, which have Gaussian distributions, are used to evaluate the vibration effect of the structure without TMD and with TMD. And an optimal method to design TMD controlling the first mode of the multi-mode structure is proposed. Moreover, the probabilities of occurrence of sea states at the platform site are considered for prediction of the long-term effect of a TMD. Simulation results demonstrate that the long-term effect of a well-designed TMD is good and the practical use is possible due to the good stability of its optimal parameters under different sea states.  相似文献   

Reliability-Based Optimal Design for Very Large Floating Structure     

张淑华 《中国海洋工程》2003,17(1)

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅａｐｐｒａｉｓａｌｏｆａｇｏｏｄｄｅｓｉｇｎｆｏｒａｖｅｒｙｌａｒｇｅｆｌｏａｔｉｎｇｓｔｒｕｃｔｕｒｅ(ＶＬＦＳ)ｔｈａｔｗｉｌｌｓｅｒｖｅｉｎａｓｐｅｃｉ ｆｉｅｄｏｃｅａｎａｒｅａｒｅｑｕｉｒｅｓｔｈａｔｔｈｅｓｔｒｕｃｔｕｒａｌｓｙｓｔｅｍｂｅｅｃｏｎｏｍｉｃａｌｌｙｄｅｓｉｇｎｅｄ ,ｔｈｅｒｅｑｕｉｒｅｍｅｎｔｓｆｏｒｉｔｓｆｕｎｃｔｉｏｎｂｅｓａｔｉｓｆｉｅｄａｎｄｔｈｅｓｔｒｕｃｔｕｒｅｋｅｅｐｓｓｔａｂｌｅｉｎｉｔｓｗｈｏｌｅｓｅｒｖｉｃｅｐｅｒｉｏ…  相似文献   

烟威渔场盐度预报及分析     

郑东  张瑞安 《中国海洋大学学报(自然科学版)》1989,(Z1)

本文以我国北黄海的烟威渔场为研究对象,采用优选因子场预报模式,对盐度的时空变化进行预报试验。文中对所采用的统计预报方法,作了简要介绍。对影响本海区盐度变化的显著因子及预报结果作了初步分析。预报试验表明:预报的总体平均绝对误差为0.27‰,预报相对误差在18％左右,预报误差小于0.5‰的站数占总站数的85％,预报趋势与实测资料基本一致。  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献